ビーコン

No, straps are not included with the kits. This gives you the choice to use FluxPose how you want, without being required to pay for straps which you might not need.

When you select a kit on the store, it will automatically select a recommended combination of straps to add to the order. You can choose to change the selection, including the option to switch to 1/4" adapters or to upgrade to comfort straps.

Please note that the beacon and trackers do not include mounting points for any strap per default. You will need to add straps or adapters to your order, or DIY your own solution.

We cannot guarantee that we will be able to change your order or its shipping address after it is placed, but we will try our best.

For store orders, please contact us at contact@fluxpose.com. For Kickstarter pledges, please contact us through Kickstarter DMs.

Order placed though our store always include an invoice.

To receive an invoice for a Kickstarter pledge, please contact us via Kickstarter DMs.

Yes, the beacon is meant to be worn. This ensures it is in range of all trackers and allows it to act as an additional tracker (usually for the hip.) Other configurations are possible but are considered DIY.

The included dock has a built-in wireless dongle. A separate dongle can be used for the following things:

- If you do not want to plug the dock into your PC.

- If the dock will be far away from your playspace or obstructed by other electrical devices.

- If you wish to use more than 10 devices without using an additional dock.

Yes, a tracker must be attached to the headset. This is used to align the beacon to your headset and to keep it solidly attached to your playspace.

A dock can charge up to 8 trackers and one beacon in less than 1.5 hours if connected to a powerful charger via its power delivery port.When the dock is only connected to a PC, charging takes about 2.5 hours. Using slower charging prolongs the life of the internal batteries.

Nearby metal can interfere with FluxPose, affecting the tracking quality.

Most metal inferference results in the tracking becoming more floaty. This includes rebar in concrete floors, controllers with significant metal, some spring matresses, light metal in desks or bedframes, metal bottles, metal poles, threadmills, kitchen appliences such as ovens, fridges, dishwashers.

More significant metal might cause the tracking to offset or stop working completely. This includes solid steel plates or bars, metal doorframes.

Regular magnets do not affect FluxPose.

Metal interfence generally occurs if the object comes within about 10cm of a tracker or the beacon. When the object is removed, the tracking quickly returns to normal. No recalibration is needed.

Improvements to FluxPose have reduced the impact of metal interference to the point that we believe most people will not be significantly affected by it.

Trackers last up to 24 hours on a single charge.
The beacon has a battery life which depends on the power mode used:

- Low power: 24 hours.
- Normal: 12 hours.
- Performance: 6 hours.

The Lite kit is the minimum for full-body tracking, or gloves / controller tracking.
The beacon is the hip-tracker, and one tracker is placed on the headset with the included mount. After this, each tracker can be used as an independent tracking point and can be placed anywhere within the range of the beacon.

For full-body tracking you could place one tracker on each foot or leg. For hand tracking, one tracker can be placed on each glove or controller. Additional trackers can be placed on the legs, arms, chest, or any other objects you wish to track.

In cases of extreme metal interference, some setups might give lower quality tracking. See the FAQ entry "How is FluxPose affected by metal?" for more information.

Feel free to ask on the Discord for recommendations for your setup!

FluxPose uses an alternating magnetic field similar to how an induction stove works, but with about 5000x less power. There are no known health risks to this technology.

We advise not to use FluxPose if you have a pacemaker or other electronic medical devices. Contact your doctor for advice.

The beacon has 3 power modes, which affect its battery life and the tracking quality of the system.

- Low power: Low energy, such as standing, sitting or laying.

- Normal: High energy, such as dancing.

- Performance: When using controller or gloves tracking.

Using a higher power mode is recommended when trackers are further away from the beacon.

All orders will be shipped in the following order: Kickstarter Early Bird and Supporter Kits → All other Kickstarter Kits → Kits purchased through the store.

The current estimate is the first half of 2027.

FluxPose is designed, assembled, calibrated and shipped from Spain.

We ship to all countries which can be selected on the checkout page. If your country is not listed, we currently do not ship to this location. We plan to support more countries over time, and countries may be removed in the future if necessary.

Important:

If we are unable to ship to your specific address due to export restrictions, courier limitations, or changes in international regulations, we reserve the right to cancel and fully refund your order.

Each headset needs a custom adapter made for use with FluxPose. We have a number of headsets currently supported, and plan to add more in the future.

A full list of supported headsets can be found on the product page for the headset mount or any kit, under the Headset Type dropdown. If there’s another headset you would like us to support, please let us know in the Discord.

Tools to design and calibrate an adapter yourself will also be available in the future.